Common Tiling Mistakes and How to Avoid Them

Tiles offer very flexible and practical solutions to provide walls and floors throughout your home with a fresh and stylish new look. However, if you want to make sure you’re left with a tiled haven rather than a tiling headache, it pays to know the common tiling mistakes – and how to avoid them. However, if you are not sure about starting a DIY tiling job, you can get help from professional tiling solution in Perth.

Fortunately for you, that's all this blog is about. We will run some common errors made by people with tiles, giving you the right knowledge to avoid making the same mistake when updating your home. From bad preparation to choosing the wrong tile for the job, we will help you navigate the tile installation process to ensure you are left with professional final results.

1. Not preparing the surface

Like most things, good preparation is the key to doing work well – and this definitely applies to installing tiles. Whether you’re tiling walls or floors, failing to do the right preparation to the surface before you begin tiling is one of the most common pitfalls and is guaranteed to leave you with a less than satisfactory finish. 

When installing tiles, the surface must be level and clean. This means spending time filling in any cracks or dents or sanding down any bumps that are bigger than 4-5mm. If the surface is particularly uneven, you can apply a new top surface such as plasterboard for walls or a self-leveling screed to floors. You should also remove any protruding features such as screws or nails. 

2. Using the wrong adhesive

It's a common misunderstanding that each adhesive will work when you install tiles, but this clearly doesn't happen. Using the wrong adhesive in a certain area is a rookie tile error and which can affect the longevity and integrity of the entire tile area.  This means it pays to get the right adhesive from the off, as rectifying your mistakes can be costly and laborious. 

You may also like