A turbine diaphragm is a component of a steam turbine that separates the steam and exhaust gases. It is made up of a series of plates that rotate around a central shaft.
The steam and exhaust gases flow through the diaphragm in opposite directions, and the rotation of the diaphragm causes them to overlap. This overlap creates a pressure difference between the two fluids, which powers the turbines.You can get the services of turbine diaphragm repair through Allied Power Group.
Image source google
How to replace a turbine diaphragm
If your turbine diaphragm is broken, you will need to replace it. The process of replacing a turbine diaphragm is not difficult, but there are a few steps that must be followed in order to do it correctly. Turbine diaphragms are usually replaced as part of a larger mechanical system overhaul. When the entire mechanical system is replaced, the entire turbine will usually be replaced at the same time. However, if only the turbine diaphragm is defective, it can be replaced without affecting the rest of the system.
The first step in replacing a turbine diaphragm is to determine whether or not the entire device needs to be replaced. If only the diaphragm is defective, it can often be repaired and saved from being thrown out. To determine if the whole device needs to be replaced, take measurements and examine schematics for the machine.
If only thediaphragm needs to be replaced, remove it from its housing by removal screws or by prying it loose with a screwdriver blade or similar tool. Be careful not to damage any wires or other internal components while removing it.